Witbox: Unterschied zwischen den Versionen

← Zum vorherigen Versionsunterschied

VisuellWikitext

@@ Zeile 1: / Zeile 1: @@
-= Supporters - Witbox: =
+{{Maschinenring}}
+{{Head_de}}
+{{Machine
+|image=Witbox.png
+|owner=Metalab
+|status=Inaktiv
+|requirestraining=Ja
+|requiresauth=Ja
+|cost=0.10 euro / gram
+|teachers=[[User:Hetti|Hetti]]
+}}
+{| width="100%"
+__TOC__
+'''It is OK to use the printer as it is.'''
-Für Anschaffung wie am Jour Fixe beschlossen: [[2015-10-01_Jour_Fixe]]
+'''It is NOT OK to modify it in any way.'''
+This is a consumer grade semi professional machine, if you want to tinker with a 3d-printer check out the mendel90 reprap.
+'''If you notice any problems with the machine''' (maintenance required, damage) '''you are required to report your observations'''. Please use either subscribers-only mailing lists intern@ or [https://lists.metalab.at/mailman/listinfo/3d-printing 3d-printing@], the  [https://metalab.at/issues/ issue tracker] or mail to http://metalab.at/wiki/images/2/2b/Core.png.
+===Overview===
+Filament diameter 1.75mm
+Layer height: 0.05-0.25 mm (0.2 is fast and looks good)
+Material: PLA only
+Firmware version: 1.4.2 ( 29.10.2015)
+This machine was sponsored (better price) from [http://www.3dee.at/ 3dee.at]
+===How to use it===
+'''Calibration (before every job @ metalab)'''
+* There is a calibration sheet inside the witbox.
+* Calibration is simple. Just follow the instructions on the menu.
+* Configuration -> Level plate
+'''Load / Change Filament if neccessary  - Careful not to entangle the filament!!'''
+* To change or unload the filament select the matching option from the menu
+* very gently apply some pull to the filament and you will feel that the filament is actually pulled for extraction first and after some seconds it is ejected
+* Once the filament is eject apply some more pullign force
+* when the filament comes loose pull sharply and remove the filament from the tube completely (also any long debris that might hang off the filament needs to get out)
+'''Save your .gcode to the SD card'''
+* Start cura
+* Import .stl
+* Save to SD
+* You can use folders with your nickname to group your files on an SD card. The Witbox' display will only show the first 19 characters of a filename. So make sure you can distinguish multiple files within that limit so you always print the correct file.
+* Done.
+'''Start job from menu'''
+* Select "Print from SD"
+* Select your job
+* Push  dialing wheel- > job starts
+'''Pay used filament'''
+* Calculate used material with your slicer or http://gcode.ws/
+* Material costs are 0,10€/gramm
+* Deposit appropriate amount in the 3D printing cash box.
+===Wisdom Tables ===
+These settings have been tested and worked fine.  {{Yes}}
 {| class="wikitable"
+!width="200"| MATERIAL !!width="50"| Layer height !! width="50"| Speed !! width="100"| Temperature (°C)  !! width="100"|Who tried this !! width="450"|  Notes
 |-
-! Name !! Amount !! an metalab bezahlt?
+| PLA Neon Green || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
 |-
-| [[Benutzer:Zwax|zwax]] || €200 || {{No}}
+| PLA Neon Green || 0.2mm ||60mm/sec || 220C || [[Benutzer:0x3d|0x3d]] || acceptable, 1st layer overhang curls, maybe too hot and slow
 |-
-| [[Benutzer:Ente|ente]] || €15 || {{Yes}}
+| PLA WHITE (no name big spool) || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Looks better at higher temperature
 |-
-| [[User:pl|pl]] || €15 || {{No}}
+| PLA Black bq || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
 |-
-| [[User:prikle|prikle]] || €20 || {{No}}
+| PLA Black bq || 0.05mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Very fine resolution!, Looks good! Used for [https://github.com/Xyl2k/TSA-Travel-Sentry-master-keys TSA keyset]
 |-
-|<hr>||<hr>||<hr>
+| PLA transparent bq|| 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
 |-
-|'''Summe'''||align=right style="padding-right:20px;"| €230  ||
+| PLA purple noname (3dee.at)|| 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
+|-
+| PLA blue noname (3dee.at)|| 0.2mm ||80mm/sec || 210C || [[Benutzer:Don|don]] || Large rectangular bottom layer was not sticking to the plate with Cura's default Witbox advanced settings. Default first layer thickness = 0.3mm and default first layer speed = 20mm/sec. I changed these to 0.2mm and 80mm/sec respectively and then it worked perfectly.
+|-
+|}
+These settings caused some problems  {{No}}
+{| class="wikitable"
+!width="200"| MATERIAL !!width="50"| Layer height !! width="50"| Speed  !! width="100"|Temperature (°C)  !! width="100"|Who tried this !! width="100"|  Notes
+|-
+| WHAT?  || LAYER? ||SPEED||  TEMPERATURE || [[Benutzer:you|you]] || COMMENTS
+|-
 |}
+=== Software ===
+[http://www.bq.com/gb/support/witbox Cura for Witbox]
+[http://www.bq.com/gb/support/witbox Slic3r config files & manual]
+Slic3r zip contains 3 different config files:
+* Witbox_res_alta.ini -> 0.1 mm layer height
+* Witbox_res_baja.ini -> 0.3 mm layer height
+* Witbox_res_media.ini -> 0.2 mm layer height
+Metalab config bundle for slic3r: [[Datei:Slic3r_config_bundle_metalab_v1.zip]]
+=== [[Diskussion:Witbox|Supporters]] ===
+<br />
+=== Diverse Links ===
-__NOTOC__
+* [http://gcode.ws/ Gcode.ws] Analyse gcode for prize and duration (usefull if you use slic3r)
+* [https://github.com/bq/witbox Design] of the 3D-Printer is under CreativeCommons licence.
+* [http://www.heise.de/make/artikel/FDM-3D-Drucker-im-Vergleich-2545710.html heise.de comparsion of different printers (German)] (pro for our use: we can buy replacement parts easily in Vienna)
+* [http://www.heise.de/make/meldung/Stabil-aber-laut-3D-Drucker-Witbox-von-BQ-im-Test-2752929.html Review of the printer (German)]<br /><br />
+* Other reviews (english):
+** [https://www.3dhubs.com/3d-printers/witbox 3dhubs reviews]
+** [https://blog.adafruit.com/2014/12/04/bq-witbox-review-by-tom-3dthursday-3dprinting/ Adafruit article]
+** [https://chopmeister.blogspot.cz/2014/08/sifting-through-features-or-guide-to.html 'Sifting through the features or "The Guide to Not Buying a 3D Printer"'].