Laser/Experiments: Unterschied zwischen den Versionen
JoaK (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
Chrysn (Diskussion | Beiträge) tests for the metalab lazzzor mouzzze pad |
||
| Zeile 25: | Zeile 25: | ||
** Engraving: more experiments to be done, but note: large black areas will melt the material deeply, thin lines will result in very betauful printing on the material (I used red felt, engraving on dark/brown/black felt might not make much sense) | ** Engraving: more experiments to be done, but note: large black areas will melt the material deeply, thin lines will result in very betauful printing on the material (I used red felt, engraving on dark/brown/black felt might not make much sense) | ||
* Jeans / Denim | |||
** engraving: 60% speed, 60% power. | |||
** engraving of denim glued onto wood: 60% speed, 100% power gets almost through the cloth and makes the wood partially visible. | |||
** cutting of denim glued onto wood: just cut a bit slower than through the wood alone (e.g. 15% speed instead of 20% speed) | |||
== ideas == | == ideas == | ||