|
|
| (19 dazwischenliegende Versionen von 6 Benutzern werden nicht angezeigt) |
| Zeile 1: |
Zeile 1: |
| == WTF? == | | == WTF? == |
| | | [[Bild:Eliot.jpg|thumb|400px|right|WLAN im Metalab, ~2009-2013]] |
| [[Bild:Eliot.jpg|thumb|400px|left]] | | Die Wireless AccessPoint Infrastruktur im Metalab: |
| Das Metalab stellt seit neuestem eine umfangreichere Wirelessinfrastruktur bereit.
| |
|
| |
|
| Es gibt derzeit folgende Netze: | | Es gibt derzeit folgende Netze: |
|
| |
|
| *'''metalab_802.11g_NOCRYPT''': unverschlüsselter direktzugang ins netz | | * '''metalab''': unverschlüsselter Direktzugang ins Netz |
| *'''whateverlab''': unverschlüsseltes Netz im [[WhateverLab]]
| | * '''Metalab Secure''': verschlüsselter <small><small>(nur zwischen Client und AP)</small></small> Direktzugang ins Netz via FunkFeuer (Pass: metaf00lab ) |
| *'''bobonet''': 802.11n-5Ghz-Wlan bereitgestellt von den Mac-Usern ueber ihr [http://www.apple.com/airportextreme/ kleines weisses extreme Kastl] | | * '''Metalights''': unverschlüsseltes Netz für das [[Cybersolarium]] |
| *'''djangonet''': geNATetes Wlan in der [[Bibliothek]] bereitgestellt von einem [http://homesupport.cisco.com/en-us/wireless/lbc/WRT160N Qualitätsprodukt aus dem Hause Cisco] ("experimental")
| | * '''LoungeNet''': unverschlüsseltes Netz in der [[Lounge]] |
| | |
| <!-- früher gab es auch: | |
| *'''metalab_802.11g_TOR''': TOR geroutet, etwas langsamer dafür aber "fast" anonym
| |
| *'''metalab-wpa2''': WPA2 enterprise mit clientzertifikaten
| |
| *'''metalab-wpa2-certcreation''': und da kann man sich certs basteln ([[How_to_connect_to_the_WPA2_EAP-TLS_network]])
| |
| -->
| |
| | |
| == Config files ==
| |
| | |
| === <tt>metalab_820.11.g_NOCRYPT</tt> (Linksys) ===
| |
| | |
| '''/etc/config/network'''
| |
| | |
| <pre>
| |
| #### VLAN configuration
| |
| config switch eth0
| |
| option vlan0 "1 2 3 4 5*"
| |
| option vlan1 "0 5"
| |
| | |
| #### Loopback configuration
| |
| config interface loopback
| |
| option ifname "lo"
| |
| option proto static
| |
| option ipaddr 127.0.0.1
| |
| option netmask 255.0.0.0
| |
| | |
| | |
| #### LAN configuration
| |
| config interface lan
| |
| option type bridge
| |
| option ifname "eth0.0"
| |
| option proto static
| |
| option ipaddr 10.20.30.99
| |
| option netmask 255.255.255.0
| |
| option gateway 10.20.30.1
| |
|
| |
|
| |
| config interface tor
| |
| option ifname "eth0.1"
| |
| option proto static
| |
| option ipaddr 192.168.42.1
| |
| option netmask 255.255.255.0
| |
|
| |
| config route
| |
| option interface tor
| |
| option target 10.20.42.0
| |
| option netmask 255.255.255.0
| |
| </pre>
| |
| | |
| | |
| | |
| '''/etc/config/wireless'''
| |
| | |
| <pre>
| |
| config wifi-device wl0
| |
| option type broadcom
| |
| option channel 1
| |
| config wifi-iface
| |
| option device wl0
| |
| option network lan
| |
| option mode ap
| |
| option ssid metalab_802.11g_NOCRYPT
| |
| option encryption none
| |
| option hidden '0'
| |
| option isolate '0'
| |
| option bgscan '0'
| |
| option wds '0'
| |
| </pre> | |
| | |
| === <tt>whateverlab</tt> (Linksys WRT54G v3.1) ===
| |
| '''/etc/config/network''' | |
| <pre>
| |
| #### VLAN configuration
| |
| config switch eth0
| |
| option enable 1
| |
| | |
| config switch_vlan eth0_0
| |
| option device "eth0"
| |
| option vlan 0
| |
| option ports "1 2 3 4 5"
| |
| | |
| config switch_vlan eth0_1
| |
| option device "eth0"
| |
| option vlan 1
| |
| option ports "0 5"
| |
| | |
| #### Loopback configuration
| |
| config interface loopback
| |
| option ifname "lo"
| |
| option proto static
| |
| option ipaddr 127.0.0.1
| |
| option netmask 255.0.0.0
| |
| | |
| | |
| #### LAN configuration
| |
| config interface lan
| |
| option type bridge
| |
| option ifname "eth0.0"
| |
| option proto static
| |
| option ipaddr 10.20.30.45
| |
| option netmask 255.255.0.0
| |
| option gateway 10.20.30.1
| |
| option dns 10.20.30.1
| |
| | |
| | |
| #### WAN configuration
| |
| config interface wan
| |
| option ifname "eth0.1"
| |
| option proto dhcp
| |
| </pre>
| |
| | |
| '''/etc/config/wireless''' | |
| <pre>
| |
| config wifi-device radio0
| |
| option type mac80211
| |
| option channel 5
| |
| option macaddr 00:14:bf:37:40:6a
| |
| option hwmode 11g
| |
| | |
| ## REMOVE THIS LINE TO ENABLE WIFI:
| |
| #option disabled 1
| |
| | |
| config wifi-iface
| |
| option device radio0
| |
| option network lan
| |
| option mode ap
| |
| option ssid whateverlab
| |
| option encryption none
| |
| </pre>
| |
| | |
| == Software links ==
| |
| | |
| ..tbd..
| |
| | |
| === <tt>whateverlab</tt> ===
| |
| Am Whateverlab-Router läuft OpenWrt 10.03.1-rc3 (''Backfire'') für brcm47xx.
| |
|
| |
|
| | == Hardware == |
|
| |
|
| == About ==
| | * 5 x Ubiquity Unifi AC Lite |
| ..tbd..
| | * '''LoungeNet''': 1 x WRT54GL |
|
| |
|
| [[Kategorie:Netzwerk]] | | [[Kategorie:Netzwerk]] |
