Witbox: Unterschied zwischen den Versionen

@@ Zeile 67: / Zeile 67: @@
 {| class="wikitable"
-!width="200"| MATERIAL !!width="50"| Layer height !! width="50"| Speed !! width="100"| Temperature (°C)  !! width="100"|Who tried this !! width="100"|  Notes
+!width="200"| MATERIAL !!width="50"| Layer height !! width="50"| Speed !! width="100"| Temperature (°C)  !! width="100"|Who tried this !! width="450"|  Notes
 |-
 | PLA Neon Green || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
@@ Zeile 82: / Zeile 82: @@
 |-
 | PLA purple noname (3dee.at)|| 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
+|-
+| PLA blue noname (3dee.at)|| 0.2mm ||80mm/sec || 210C || [[Benutzer:Don|don]] || Large rectangular bottom layer was not sticking to the plate with Cura's default Witbox advanced settings. Default first layer thickness = 0.3mm and default first layer speed = 20mm/sec. I changed these to 0.2mm and 80mm/sec respectively and then it worked perfectly.
 |-
 |}