MHS: Unterschied zwischen den Versionen
aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
Anlumo (Diskussion | Beiträge) (Informationen++) |
Anlumo (Diskussion | Beiträge) K (Formatting) |
||
| Zeile 21: | Zeile 21: | ||
Mounting information: | Mounting information: | ||
* An Air gap of 8mm or more will be required between the LCD panel and the touch sensor. | |||
* In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded. | |||
* Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables. | |||
* Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit. | |||
* Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap. | |||
* please note that 1mm of air is equal to 3mm of glass | |||
* It is important to allow for circulation of air in front of the LCD. | |||
Original-Abstandshalter war ~11x11mm (vermutlich Acryl) | Original-Abstandshalter war ~11x11mm (vermutlich Acryl) | ||
Version vom 3. Mai 2014, 21:36 Uhr
| MHS | |
| |
| Gestartet: | |
| Involvierte: | Various Artists |
| Status: | in progress |
| Beschreibung: | Documentation of our Moderately Huge Screens |
| Shutdownprozedur: | |
| Zuletzt aktualisiert: | 2014-05-03 |
TODO
Monitor
Bildschirmseite vom Hersteller
äußere Schrauben sind M4, die vom VESA-Pattern sind M6
Touchscreen
Touchglasplatte: 102.2x65.2x0.37cm
Mounting information:
- An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.
- In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.
- Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.
- Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit.
- Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.
- please note that 1mm of air is equal to 3mm of glass
- It is important to allow for circulation of air in front of the LCD.
Original-Abstandshalter war ~11x11mm (vermutlich Acryl)
