MHS: Unterschied zwischen den Versionen

@@ Zeile 6: / Zeile 6: @@
 }}
 TODO
+= Monitor =
+[http://www.necdisplay.com/p/large--screen-displays/lcd4215-r?type=support Bildschirmseite vom Hersteller]
+äußere Schrauben sind M4, die vom VESA-Pattern sind M6
+= Touchscreen =
+Touchglasplatte: 102.2x65.2x0.37cm
+[http://www.visualplanet.biz/get-interactive/driver-download.php Treiber]
+Mounting information:
+   * An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.
+   * In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.
+   * Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.
+   * Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit.
+   * Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.
+   * please note that 1mm of air is equal to 3mm of glass
+   * It is important to allow for circulation of air in front of the LCD.
+Original-Abstandshalter war ~11x11mm (vermutlich Acryl)