Blinkofant: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
Zeile 13: Zeile 13:


* POUT EQU CENTRO ;the leftmost module will be connected to the POUT-port
* POUT EQU CENTRO ;the leftmost module will be connected to the POUT-port
*   ;ATTENTION! The bit positions must not be changed!
* ATTENTION! The bit positions must not be changed!
*  DatLoad EQU 0 ;data bit for loading data and control data
*  ClkRing EQU 1 ;clock for shift left the whole line
*  ClkLoad EQU 2 ;clock for shift left & loading all selected modules
*  ClkBlink EQU 3 ;clock for blinking (0...off, 1...on)
*  ClkSteu EQU 4 ;clock for shift left & load control data from DatLoad
*  DatRing EQU 5 ;data bit for loading data during ClkRing
*  Reset  EQU 6 ;clear all control data
*  OnOff  EQU 7 ;turn on/off the whole display (0...off, 1...on)




Zeile 32: Zeile 24:
|-
|-
| 1
| 1
| whatever
| data/clock ? comes back out here (rückleitung schebereigster)
|-
|-
| 2
| 2
| whatever
| data/clock ? comes back out here (rückleitung schebereigster)
|-
|-
| 3
| 3
| whatever
| DatLoad EQU 0 ;data bit for loading data and control data
|-
|-
| 4
| 4
| whatever
| ClkRing EQU 1 ;clock for shift left the whole line
|-
|-
| 5
| 5
| whatever
| ClkLoad EQU 2 ;clock for shift left & loading all selected modules
|-
|-
| 6
| 6
| whatever
| ClkBlink EQU 3 ;clock for blinking (0...off, 1...on)
|-
|-
| 7
| 7
| whatever
| ClkSteu EQU 4 ;clock for shift left & load control data from DatLoad
|-
|-
| 8
| 8
| whatever
| DatRing EQU 5 ;data bit for loading data during ClkRing
|-
|-
| 9
| 9
| whatever
| Reset  EQU 6 ;clear all control data
|-
|-
| 10
| 10
| whatever
| OnOff  EQU 7 ;turn on/off the whole display (0...off, 1...on)
| turns off ALL the leds when pulled to ground
|-
|-
|}
|}

Version vom 25. März 2012, 16:45 Uhr

WTF

Wir haben von der Eishalle Kagran eine RIESIGE rote LEDwall geschenkt bekommen.

Nun müssen die 90.000 pixel zum blinken gebracht werden.

Anbei die Doku

1 modul
4 module chained

Doku der pins

  • POUT EQU CENTRO ;the leftmost module will be connected to the POUT-port
  • ATTENTION! The bit positions must not be changed!


  • 8V, 5V, 12V, GND sind auf unseren boards NICHT bestückt mit pins.


pin number function
1 data/clock ? comes back out here (rückleitung schebereigster)
2 data/clock ? comes back out here (rückleitung schebereigster)
3 DatLoad EQU 0 ;data bit for loading data and control data
4 ClkRing EQU 1 ;clock for shift left the whole line
5 ClkLoad EQU 2 ;clock for shift left & loading all selected modules
6 ClkBlink EQU 3 ;clock for blinking (0...off, 1...on)
7 ClkSteu EQU 4 ;clock for shift left & load control data from DatLoad
8 DatRing EQU 5 ;data bit for loading data during ClkRing
9 Reset EQU 6 ;clear all control data
10 OnOff EQU 7 ;turn on/off the whole display (0...off, 1...on) turns off ALL the leds when pulled to ground