Led Matrix

Medien

hypnomatrix is hypnotizing

all hail to the hypnomatrix

{{#ev:youtube|pHdAvMrkO0U}}

For the LED Matrix we want to build on the CCCamp2007 we decided to design a GNU LEDMatrix Controller/Driver setup. It will consist of two parts the FPGA board and a several driver electronics boards. Now almost one year later we're still working on it :)

Status

Everything is soldered and it works. We can stream videos via the parallel interface of the via board to the matrix with 72fps :)

• main svn: https://whatever.metalab.at/projects/FPGAMatrix/
• cliffords mplayer patch: http://svn.clifford.at/metaleds/

Usage examples

clifford/mplayer/mplayer-bin -vo metaleds:/dev/lp0 -framedrop -vf scale -zoom -x 72 -y 48 test.avi
netcat -l -p 7000 > /dev/lp0

Format is: 72x48 bytes of pixeldata (ranging from 0x00 to 0x0F) followed by a single 0x80 (to flip framebuffers)

Protocol

3456 bytes ranging vrom 0 (0x00) to 15  (0x0F)
each byte represets one pixel with a brightness ranging from 0 to 15
the pixels start at the upper left corner and are numbered as in the selfexplaining example below 
after each fram 1 flipbyte (0x80) is sent that  sets framebuffer and displays the data sent before.
all output on is doublebuffered on the fpga.

 ________________________
| 1  2  3 .......      48|
|49 50  .........      96|  
|.                       |
|.                       |
|3408.....           3456|
 _________________________ 

Using with Python

You can use functions like getpixel, setpixel, submit with the python classes in https://whatever.metalab.at/projects/FPGAMatrix/python/

It supports the (now encouraged) way of using TCP. A example (Game of Life) is available.

Specs

72x48 pixels totals 3456 blue leds 54 column driver modules (current source). 1 row driver mudule (current sink)

The 8 rows are each connected to a powermosfet and are driven to ground one at a time (so the matrix is 8times multiplexed). For driving the mosfets we use two Quad-mosfetdriver which in turn are controlled by a 8bit shifting register.

For the columns we take almost the same components except that we have to source current. The mosfets can source up to 250mA but we limit it to about 20mA.

Used ICs

• NID5001N MOSFETS for the row driver
• TC4467 used as column driver
• 74HC595 shifting registers

New MiniITX Board

VIA EPIA-M 1000G

1 Ghz 1 Gig RAM MPEG2 Decoderchipset