Wizard23/USB EEG with Arduino HowTo: Unterschied zwischen den Versionen
Keine Bearbeitungszusammenfassung |
Keine Bearbeitungszusammenfassung |
||
| Zeile 1: | Zeile 1: | ||
this is just a writeup of some tricks I learned from [[User:MariusKintel]] | |||
# installing avr gcc | # installing avr gcc | ||
sudo apt-get install gcc-avr avr-libc | sudo apt-get install gcc-avr avr-libc | ||
| Zeile 4: | Zeile 6: | ||
# removing dmx drivers | # removing dmx drivers | ||
sudo rmmod dmx_usb | sudo rmmod dmx_usb | ||
# finding out how big a hex file is on the atmel | |||
avr-size main.hex | |||
# programming the bootloader | |||
sudo make -f Makefile.usbasp DEVICE=atmega8 HEXFILE=ATmegaBOOT.hex | |||
# flashing arduino | # flashing arduino | ||
| Zeile 19: | Zeile 27: | ||
#testen | #testen | ||
screen /dev/ttyUSB0 115200 | screen /dev/ttyUSB0 115200 | ||
# pinout remember help for marius usb programmarer | |||
USB stecker | |||
A T M E L | |||
10pinheader | |||
r b | |||
e l | |||
d u | |||
e | |||
10-to-6 stecker | |||
r | |||
e | |||
d | |||
6-to-6 fuer EEG | |||
r b | |||
e l | |||
d a | |||
c | |||
k | |||