Quelltext der Seite Witbox

{{Maschinenring}}
{{Head_de}}
{{Machine
|image=Witbox.png
|owner=Metalab
|status=Aktiv
|requirestraining=Ja
|requiresauth=[[Scanner_Raum|Ja]] 
|cost=0.10 euro / gram
}}
__TOC__




'''It is OK to use the printer as it is.'''

'''It is NOT OK to modify it in any way.'''

This is a consumer grade semi professional machine, if you want to tinker with a 3d-printer check out the mendel90 reprap.


===Overview===
Filament diameter 1.75mm

Layer height: 0.05-0.25 mm (0.2 is fast and looks good)

Material: PLA only

Firmware version: 1.4.2 ( 29.10.2015)

This machine was sponsored (better price) from [http://www.3dee.at/ 3dee.at]

===How to use it===
'''Calibration (before every job @ metalab)'''

* There is a calibration sheet inside the witbox.
* Calibration is simple. Just follow the instructions on the menu.
* Configuration -> Level plate

'''Load / Change Filament if neccessary  - Careful not to entangle the filament!!'''
* To change or unload the filament select the matching option from the menu
* very gently apply some pull to the filament and you will feel that the filament is actually pulled for extraction first and after some seconds it is ejected
* Once the filament is eject apply some more pullign force
* when the filament comes loose pull sharply and remove the filament from the tube completely (also any long debris that might hang off the filament needs to get out)

'''Save your .gcode to the SD card'''
* Start cura
* Import .stl
* Save to SD
* Done.

'''Start job from menu'''
* Select "Print from SD"
* Select your job
* Push  dialing wheel- > job starts

'''Pay used filament'''

?

===Wisdom Tables ===
These settings have been tested and worked fine.  {{Yes}}

{| class="wikitable"
!width="200"| MATERIAL !!width="50"| Layer height !! width="50"| Speed !! width="100"| Temperature (°C)  !! width="100"|Who tried this !! width="100"|  Notes
|-
| PLA Neon Green || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
|-
| PLA Neon Green || 0.2mm ||60mm/sec || 220C || [[Benutzer:0x3d|0x3d]] || acceptable, 1st layer overhang curls, maybe too hot and slow
|-
| PLA WHITE (no name big spool) || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Looks better at higher temperature
|-
| PLA Black bq || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
|-
| PLA Black bq || 0.05mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Very fine resolution!, Looks good! Used for [https://github.com/Xyl2k/TSA-Travel-Sentry-master-keys TSA keyset]
|-
| PLA transparent bq|| 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
|-
| PLA purple noname (3dee.at)|| 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.
|-
|}


These settings caused some problems  {{No}}

{| class="wikitable"
!width="200"| MATERIAL !!width="50"| Layer height !! width="50"| Speed  !! width="100"|Temperature (°C)  !! width="100"|Who tried this !! width="100"|  Notes
|-
| WHAT?  || LAYER? ||SPEED||  TEMPERATURE || [[Benutzer:you|you]] || COMMENTS  
|- 
|}

=== Software ===
[http://www.bq.com/gb/support/witbox Cura for Witbox]

[http://www.bq.com/gb/support/witbox Slic3r config files & manual]

Slic3r zip contains 3 different config files:
* Witbox_res_alta.ini -> 0.1 mm layer height
* Witbox_res_baja.ini -> 0.3 mm layer height
* Witbox_res_media.ini -> 0.2 mm layer height

=== [[Diskussion:Witbox|Supporters]] ===

<br />

=== Diverse Links ===

* [https://github.com/bq/witbox Design] of the 3D-Printer is under CreativeCommons licence.
* [http://www.heise.de/make/artikel/FDM-3D-Drucker-im-Vergleich-2545710.html heise.de comparsion of different printers (German)] (pro for our use: we can buy replacement parts easily in Vienna)
* [http://www.heise.de/make/meldung/Stabil-aber-laut-3D-Drucker-Witbox-von-BQ-im-Test-2752929.html Review of the printer (German)]<br /><br />
* Other reviews (english):
** [https://www.3dhubs.com/3d-printers/witbox 3dhubs reviews]
** [https://blog.adafruit.com/2014/12/04/bq-witbox-review-by-tom-3dthursday-3dprinting/ Adafruit article]
** [https://chopmeister.blogspot.cz/2014/08/sifting-through-features-or-guide-to.html 'Sifting through the features or "The Guide to Not Buying a 3D Printer"'].