Quelltext der Seite NSA-Backup-Device/Log

Here is my log for building and installing Debian on the [[NSA-Backup-Device|D-Link DNS-320 NAS]]. If anything is unclear, you have questions or improvements please drop me an email dns320 to AT to woerm DOT at.

<pre>
                               PROGRESS MADE SO FAR
Serial console                                                           [x],
U-boot via. u-art                                                        [x],
U-boot via. nand                                                         [x],
Debootstrap Debian                                                       [~],
U-Boot ubifs-image                                                       [~],
Configure Debian correctly                                               [ ]
[#######################¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦]
</pre>

= Compiling u-boot.kwb =

* Clone u-boot from master-branch <code>git clone -b dns320_support https://github.com/lentinj/u-boot.git</code>
* set export-variable <code>export CROSS_COMPILE=arm-linux-gnueabi-</code>
* <code>make distclean</code> <br />
** tells me make: arm-linux-gnueabi-gcc: Command not found
** <code>export CROSS_COMPILE=arm-linux-gnu-</code> correct variable on Fed
* <code>make dns320_config</code>
* <code>make u-boot-nand.kwb</code>
* change u-boot/board/d-link/dnskw/kwbimage.dns320.cfg <code>BOOT_FROM nand</code> to <code>BOOF_FROM uart</code>
* <code>make clean &amp;&amp; make dns320_config &amp;&amp; make u-boot-uart.kwb</code>

= Starting u-boot.kwb over rs232-adapter =

* connect RX =&gt; TX, TX =&gt; RX, GND &lt;=&gt; GND
* download [http://www.solinno.co.uk/public/kwuartboot/ kwuartboot-0.1] <br />
** <code>make</code>
* <code>sudo ./kwuartboot /dev/ttyUSB1 u-boot-uart.kwb; sleep 5; sudo ./kwuartboot /dev/ttyUSB1 u-boot-uart.kwb; sudo screen /dev/ttyUSB1 115200</code> <br />
** find out which is your tty device by looking into your kernel ring and searching for the string tty <code>dmesg |grep -i tty</code>
** Connect RS232, connect power, run the command, push power button once, wait, press any key for interrupting u-boot
** quit screen with pressing ctrl+a once, then push d once

= Bootstrapping debian =

* <code>debootstrap --verbose --foreign --arch=armel --variant=minbase --include=module-init-tools,locales,udev,aptitude,dialog,ifupdown,procps,iproute,iputils-ping,pump,nano,wget,netbase wheezy rootfs http://ftp.uk.debian.org/debian</code> <br />
** debootstrap requires <code>qemu-arm-static</code>, which is not provided by Fedora - maybe I need to compile it by my own using â€“static
** I am using an ubuntu vagrant image for bootstrapping debian <code>vagrant box add ubuntu64 http://cloud-images.ubuntu.com/vagrant/precise/current/precise-server-cloudimg-amd64-vagrant-disk1.box</code>
** Installing qemu <code>sudo apt-get install qemu-kvm-extras-static qemu-kvm-extras qemu qemu-user qemu-user-static</code>
* <code>cp /usr/bin/qemu-arm-static rootfs/usr/bin/</code>
* <code>chroot rootfs</code> <br />
** <code>./debootstrap/debootstrap --second-stage</code>
** <code>apt-get clean</code>
** <code>dpkg-reconfigure tzdata</code>
** <code>dpkg-reconfigure locales</code>
** <code>passwd</code>
** <code>exit #:)</code>
* <code>rm rootfs/usr/bin/qemu-arm-static</code>
* <code>sudo mkfs.ubifs -v -r rootfs -m 2048 -e 129024 -c 1016 -x zlib -o ubifs.img</code> <br />
** requires on ubuntu <code>sudo apt-get install mtd-utils</code>
** side note: You can copy files from your vagrant box to your vagrant <br /> folder with <code>cp /vagrant/</code>

= Kernel Compiling(Additionally) =

* downloading [https://kernel.org linux-2.6] <br />
** Did not work, trying it with 3x Kernel now
* setting alias for cross-make
* copying kirkwood_defconfig and adding extra options